CNC Profi System MyPlasm - PC - software with interface board

Professional plasma controller specially designed for plasma cutting machines

All functions integrated in one projekt.
Die Bedienung des CNC - Steuerungsprogramms MyPlasm ist ein Kinderspiel und für einem sehr günstigen Einführungspreis zu erhalten .  

Current software is available for download below.

Basic funktions of the program / controller

1. Max working range of the machine: No restrictions
2. Minimum pulse width Step: Auto
3. Max STEP signal frequency: 350kHz
4. Integrated THC Height Adjuster: Yes
5. Torch anti-dive function: Yes
6. Material detection function: Yes, Touch / Floating head
7. Collision sensor support: YES
8. Types of accepted files: DXF, PLT (hpgl), G-Codes (.tap)
9. Integrated CAM module: Yes, MyMini CAM
10. Automatic Wen object recognition. Outside : YES
11. Path Advance Analysis: YES
12. Cutting parameters database: YES,
13. Correction of the design angle to the material: YES
14. Operation via the GamePad controller: YES
15. Can be cut from anywhere: YES
16. The possibility of cutting from the end: YES
17. Supported CNC controllers: MyPlasm CNC
18. Support for 3rd party controllers and motherboards: NO
19. Ability to work via LPT port: NO
20. DXF, PLT or G-CODES import
21. Automatic generation of paths with offset, entrances and exits
22. The program can be used with an external CAM program 
23. Separate speed for holes
24. Parameter database
25. Correction of the design to the angle of material arrangement
26. Soft and Hardware limits
27. THC anti-dive functions
28. Game Pad controllable
29. Material detection via touch system, floating head or both.

The application runs on MS Windows (XP , 7 , 8 , 10) and requires approx. 50 MB hard disk space

Current MyPlasm sofware 107c for download
Current MyPlasm sofware 109d rotary axis for download
NEU Current MyPlasm sofware 120 rotary axis for download
Operating instructions for download
Connection - assambly - description to download


MyPlasm CNC Connections Diagram:

An ecample for the connection of the plasma interface to the CPC port:

Technical specifications

*tested under laboratory conditions
 

Scope of delivery: 

• CNC Profi - MyPlasm PC - software for download
• Datenblatt , Bedienungsanleitung mit Anschlussbelegung zum Downloaden
• 1x controller
• 1x interface board
• 1x USB - cable
• With guarantee / invoice

MyPlasm CNC System – Rotary Axis

ATTENTION !!! Before installing, make a copy of the entire folder of the software you are currently using.

MyPlasm-Rotary-Axis to download 1.0.9.d Version

Step-by-step commissioning of the rotary axis

Disable the Material Detection (Floating Head and Ohmic) function.

For the correct operation of the machine, correct operating ranges (Soft Limits) for the X, Y, Z axes must be given, where the range of the Z work axis is counted from the axis of rotation to the maximum height (to the Z Limit Switch)

1. For the optional output, select the rotary axis function
2. Enter the correct gear value for your rotary axis (recommended value 5 - 10)
3. Check if the axis is rotated correctly (direction and angle of rotation), Left mouse button rotates 45 degrees, right non-stop
4. Perform a reference move of each axis (homing)
5. Enter material parameters

8. The A + X axis mix button allows you to check the correctness of the entered data / positioning. To do this, place the tool over the base (top) wall and then press the axis binding button. Thanks to this, using the right-left arrows will also start the A and Z axes in order to check whether the movement around the profile is correct. You can use this function to cut a profile manually (around).

9. Import the project file (expansion):

If necessary, turn off the auxiliary lines (DISABLE), the correctness of the import can be checked in the 3D preview

For subsequent projects, it is not required to redefine the position of the material, the program is based on a specific axis of rotation that is unchangeable. The path is generated based on the specified dimensions of the material.

The drawing must be imported and processed after the material / profile dimensions are established.