Profi - complete - assembled control for 3 axes up to 6A per axis in a metal cabinet with LAN PC  connection, motors 8,7 Nm and handwheel

• 1x interface board for LPT port with optoisolation and power supply
• 3x control output stages SK 8060 up to 80 V, 6 A
• 3m cable each for 3 motors
• 3m cable with emergency stop switch
• 3m cable with microswitch for limit switch
• 3x reference switch with 3m cable for each reference switch
• 1x transformer 50VAC, 16A
• 1x power module 80VDC up to 20 A with fuse board
• 1x main switch and power cord for 230V
• 1x cable duct wiring duct
• 1x circuit breaker double -B 16A
• 1x fan jumps for effective air circulation and cooling of the built-in components
• 1x metal cabinet with hole punch for switches, cables and air circulation 600 x 400 x 200 mm
• 1x small parts for assembly - connection of the components
• 1x Lan card for Mach3
• 1x software Mach3 license (German) with printed towel
• 1x USB handheld cordless
• 3x motors 8.7 Nm
• 3x stepper motor mounting bracket size 86 NEMA34
• 1x assembly / installation, setting and function - test - ready for connection

Technical specifications - Descriptions

• Quiet motor running and low heating of motor and output stage.
• Good motor speed thanks to the use of the latest bipolar technology
• A closed housing that can be installed vertically or horizontally protects against mechanical defects   
• With overvoltage and short circuit protection.
• Interface board with integrated optoisolation protects the computer form damage.
• Adjustable with DIP switch(no multimeter for setting up needed)
• Automatic current reduction to 50% in standstill (sleep). (via DIP switch)
• Can be used for 2 - 3 phase and 4 phase stepper motors.
• A printed description and connection diagram is included + configuration file for Mach 3.

• Jumpers per phase of 2,0; 2,6; 3,2; 3,7; 4,3; 4,8; 5,4; 6,0 A adjustable
• 20-80 volt motor voltage
• Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
• Logic TTL-compatible (5Volt), signal control 300 kHz
• Microstep 1/2 -, 1/4 -,1/8 -, 1/16 -, 1/32 -, 1/64 -, 1/128 -, 1/256 -, 1/5 -, 1/10 -, 1/25 -, 1/50 -, 1/125 -, 1/250
• Configuration control LED
• Dimensions: W = 50mm, H = 100mm, L = 150mm

• Transformer supply 230 V / AC 50 Hz
• Optionally with thermo switch
• Our transformers have a low magnetic stray field, spall dimensions with high performance, an optimal efficiency and a central fastening.

• Primary voltage: 230 VAC, 50 / 60 Hz
• Secondary voltage: 50 V / AC
• Output power: 16 A / 800 VA
• Size: Ø 160 mm x H 65 mm

• Our modules are mainly manufactured for the supply of micro step power stage controllers for step and step and servo motors DC.
• Enables power supply for CNC control high voltage max. Up to 80VDC 6A for each connection
• With diode LEDs is e.g. the voltage is displayed to facilitate control.
• A printed connection diagram is included as an example.
• Power supply up to 55 VAC 20 A

• LEDs for the current output
• Contains cable screw connections
• Size: L 165 mm x B 60 mm x H 70 mm

• Connections for limit switch / reference switch, emergency stop switch and tool rating switch.
• 2 relays for switching functions for e.g. a spindle or coolant pump.
• Functionality control is indicated with diodes LED, which simplifies the configuration with the software.
• The distribution of the plug connections is identical to the distribution of our micro-step cards.
• A printed pin assignment and a connection diagram as an example is included in the delivery.

• Optoisolation protects the computer from damage.
• 1 relay for additional switching functions 5A / 230V
• 3 connections for limit switch / reference switch
• with Connection for emergency stop switch and tool rating switch
• Current input: 12V/250mA
• Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
• Logic TTL-compatible (5Volt)
• Removable screw connectors
• Dimensions: W= 115mm x H=77mm x L=20mm

• The switch has a holder for 2 contact blocks. By arrangement, the break contact can be ordered with a make contact or both.
• RoHS-compliant
• Installation-Ø: 22 mm screw fastening
• Button-Ø: 40 mm
• Switching capacity: 250 V/AC/3,0 A
• Connection: screw connection Design: NC 1 x on/(on)
• Temperature range: -20 - +55 °C

• Optionally, we can also install more limit switches or proximity switches instead of microswitches.

• RoHS-compliant
• Lever: roller lever L-12mm
• Execution: changer / role
• Switching capacity: 250 V/AC/16(4) A
• Connection: plug connection 6.3 x 0.8 mm or solder connections
• Dimensions:(W x H x L) 30 x 16 x 10 mm

The shielding against electromagnetic interference fields ensures interference-free signal transmission.
Possesses a higher cable strength and has a longer service life than conventional cables.
Resistant to a wide variety of oils, Acids and other chemical media.
Space-saving installation.

• Holding torque: 8.7 Nm bipolar 4 connection cables
• Phase current: 6 A / 3.6 V, - 2 phases
• Step angle: 1.8°
• Dimensions: W=86mm, H=86mm, L=113mm,
• Shaft d= 14.00mm
• Weight: 4 kg

The newly developed NEMA34 steppermotor bracket 86 mm is a strong bracket milled from aluminum.

Communication with the PC will take place via the Ethernet interface.
The LAN connection is less prone to failure because it is symmetrical and completely galvanically separated. The cable length can be any.
Pins two to nine can be used either as outputs or inputs. The following configurations are therefore possible when using all three ports:

• 36 outputs and 15 inputs
• 20 outputs and 31 inputs
• 28 outputs and 23 inputs

The ESS has a network connection with the computer and receives commands from the Mach3 CNC path control. These commands are converted by the ESS microprocessor into step impulses for up to 6 machine axes and output via up to three three parallel interfaces with a maximum step frequency of 4 MHz. The CPU of the controlling computer is thus relieved of the generation of the step impulses. This makes it possible to use relatively weak PCs or laptops to control a CNC machine. Practically all laptops on the market today no longer have a parallel interface (printer connection), a problem that is solved with the use of the ESS.

• LAN-connection(Ethernet)
• Power supply: 5 V, 300 mA
• Number of controlled axes: 6, stepper or servo motors with step/direction
• Control spindle: step direction, pulse width modulation, on/off
• Maximum step frequency: 4 MHz
• Input / output:
  • 1. Parallel interface with 12 outputs und 5 inputs
  • 2. Parallel interface with 12 outputs und 5 inputs or
  • 2. Parallel interface with 4 outputs und 13 inputs
  • 3. Parallel interface with 12 outputs und 5 inputs or
  • 3. Parallel interface with 4 outputs und 13 inputs

• MPG handwheel that works with the mach3 Surfaces program.
• It is resistant to splashing water and dust.
• Handwheel with detent that is very sensitive to use
• Jog rotary encoder with 100 steps / revolution
• X - Y - Z - A switchover switchable via rotary switch
• It supports 4 axes.
• Connection: USB
• Standard-output: 2.4G wireless
• Degree of protection: IP 65
• Dim.: L-185mm x H-100mm

* Quality product from the stockist *

* New and original packed up *

 

Scope of delivery:
Complete - assembled control for 3 axes up to 6A per axis in metal cabinet with LAN connection.
Motors 8.7 Nm with bracket
Handwheel
Mach3 license with manual
Guarantee / invoice
Data sheet with pin assignment