Profi - complete - assembled control for 4 axes up to 6A per axis in a metal cabinet
- 1x interface board for LPT port with optoisolation and power supply
- 1x LPT Datenkabel
- 4x control output stages SK 8060 up to 80 V, 6 A
- 2m cable each for 3 motors
- 2m cable with emergency stop switch
- 2m cable with microswitch for limit switch
- 6x reference switches with 2m cable for each microswitch
- 1x built in power supply 48V 24A
- 1x main switch and power cord for 230V
- 1x double fuse
- 1x Carry rail for fuse 35 mm
- 4x Contact clamp für 35 mm rails
- 1x fan jumps for effective air circulation and cooling of the built-in components
- 1x metal cabinet with hole punch for switches, cables and air circulation 600 x 400 x 200 mm
- 1x small parts for assembly - connection of the components
- 1x assembly / installation, setting and function - test - ready for connection
Technical specifications - Descriptions
*4 pieces of output stages SK8060 up to 6 A - 80V, CNC control PC-NC
- Quiet motor running and low heating of motor and output stage.
- Good motor speed thanks to the use of the latest bipolar technology
- A closed housing that can be installed vertically or horizontally protects against mechanical defects
- With overvoltage and short circuit protection.
- Interface board with integrated optoisolation protects the computer form damage.
- Adjustable with DIP switch(no multimeter for setting up needed)
- Automatic current reduction to 50% in standstill (sleep). (via DIP switch)
- Can be used for 2 - 3 phase and 4 phase stepper motors.
- Jumpers per phase of 2,0; 2,6; 3,2; 3,7; 4,3; 4,8; 5,4; 6,0 A adjustable
- 20-80 volt motor voltage
- Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
- Logic TTL-compatible (5Volt), signal control 300 kHz
- Microstep 1/2 -, 1/4 -,1/8 -, 1/16 -, 1/32 -, 1/64 -, 1/128 -, 1/256 -, 1/5 -, 1/10 -, 1/25 -, 1/50 -, 1/125 -, 1/250
- Configuration control LED
- Dimensions: W = 50mm, H = 100mm, L = 150mm
*1 piece Power supply unit - Switching power supply unit S300 48 V 6,3 A
- Compact metal housing with screw terminals, industrial quality. Soft start current. Light weight.
- Standard mounting device, therefore identical to most products from other power supply manufacturers.
- Protected against overload, overvoltage and short circuit.
- International use possible through AC and DC wide range input 110 -240 V/AC.
- Power supply unit with very low standby consumption. Environmentally friendly.
Mains input voltage: 100 -120VAC / 200-240 VAC , 50/60 Hz
Nominal output voltage: 48 V/DC -adjustable: from 41 to 56 VDC
Output power: 300W 6,3 A - 3x screw connections
Efficiency: approx. 82%
Connection: screw connection
Overload and short circuit protection
Working temperature: -10 to +60 °C
Dimensions: W =110mm, H =50mm, L=199mm
* 1 piece of interface board optoisolated connection to PC up to 4 axes
- Connections for limit switch / reference switch, emergency stop switch and tool rating switch.
- 2 relays for switching functions for e.g. a spindle or coolant pump.
- Functionality control is indicated with diodes LED, which simplifies the configuration with the software.
- The distribution of the plug connections is identical to the distribution of our micro-step cards.
- A printed pin assignment and a connection diagram as an example is included in the delivery.
- Optoisolation protects the computer from damage.
- 1 relay for additional switching functions 5A / 230V
- 3 connections for limit switch / reference switch
- with Connection for emergency stop switch and tool rating switch
- Current input: 12V/250mA
- Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
- Logic TTL-compatible (5Volt)
- Removable screw connectors
- Dimensions: W= 115mm x H=77mm x L=20mm
* 1 piece - emergency off switch
- The switch has a holder for 2 contact blocks. By arrangement, the break contact can be ordered with a make contact or both.
- RoHS-compliant
- Installation-Ø: 22 mm screw fastening
- Button-Ø: 40 mm
- Switching capacity: 250 V/AC/3,0 A
- Connection: screw connection Design: NC 1 x on/(on)
- Temperature range: -20 - +55 °C
* 4 reference switches - microswitch VT roller lever L-12
- Optionally, we can also install more limit switches or proximity switches instead of microswitches.
- RoHS-compliant
- Lever: roller lever L-12mm
- Execution: changer / role
- Switching capacity: 250 V/AC/16(4) A
- Connection: plug connection 6.3 x 0.8 mm or solder connections
- Dimensions:(W x H x L) 30 x 16 x 10 mm
* CNC-flexible copper cable 4 x 1.5 mm² - shielded, 2m for motors
* CNC-flexible copper cable 4 x 0.25 mm² - shielded, 2m each for reference switches and emergency stop switches
The shielding against electromagnetic interference fields ensures interference-free signal transmission.
Possesses a higher cable strength and has a longer service life than conventional cables.
Resistant to a wide variety of oils, Acids and other chemical media.
Space-saving installation.
If you have any further questions about this product, just send us an email to info@cncprofi.eu.
On request, we can also prepare complete CNC systems with software and ready for connection, if you are interested. Please give a precise description.
The control will be assembled after your order and payment, so delivery can take up to 4 weeks. We cannot accept an order cancellation for this article.
* Quality product from the stockist *
* New and original packed up *
Scope of delivery:
Complete - assembled control for 4 axes with 6A per axis in metal cabinet with cable
Guarantee / invoice
Data sheet with pin assignment
