Profi - Control for 3 axes - including:

• 1x control for 3 axes with metal housing SM3 up to 3.0A
• 1x power supply - switching power supply unit S150 up to 28 V and 6.3 A
• 1x LPT connection cable to PC
• 1x emergency off switch
• 3x reference switch - microswitch VT roller lever L-12
• 3x stepper motors 2 Nm and 2 A

Technical specifications - Descriptions

• A closed housing that can be installed vertically or horizontally protects against mechanical defects   
• With overvoltage and short circuit protection.
• Interface board with integrated optoisolation protects the computer form damage.
• Connection for spindle speed regulation via PC or controller.
• Connections for limit switch / reference switch, emergency stop switch and tool rating switch.
• 2 relays for switching functions for e.g. a spindle or coolant pump.
• Functionality control is indicated with diodes LED, which simplifies the configuration with the software.
• Automatic current reduction to 100%, 75%, 50%, 25% in standstill (sleep). (via DIP switch)
• Can be used for 2 - 3 phase and 4 phase stepper motors.
• A printed description and connection diagram is included + configuration file for Mach 3.

• Jumpers per phase of 0.75; 1.50; 2.25; 3 A adjustable
• 12-34 volt motor voltage
• Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
• Logic TTL-compatible (5Volt), signal control 400 kHz
• Microstep 1 / 1-, 1/2 -, 1/8 -, 1/16 -
• Toshiba TB6560AHQ chip
• Signal control 100 kHz
• Optoisolation protects the computer from damage.
• 2 relays for additional switching functions 5A / 230V
• 4 connections for limit switch / reference switch
• with Connection for emergency stop switch and tool rating switch
• Additional current output for 12 V / 1 A e.g. for fans
• Connection for spindle speed regulation signal 0 to 10 V.
• With built-in potentiometer - you can reduce the spindle signal range
• Removable screw connectors
• Closed metal housing
• Configuration control LED
• Dimensions: W = 130mm, H = 35mm, L = 150mm

• Compact metal housing with screw terminals, industrial quality. Soft start current. Light weight.
• Standard mounting device, therefore identical to most products from other power supply manufacturers.
• Protected against overload, overvoltage and short circuit.
• International use possible through AC and DC wide range input 110 -240 V/AC.
• Power supply unit with very low standby consumption. Environmentally friendly.

Mains input voltage: 100 -120VAC / 200-240 VAC , 50/60 Hz
Nominal output voltage: 24 V/DC -adjustable: from 21 to 28 VDC
Output power: 150W 6.3 A - 2x screw connections
Efficiency: approx. 85% 
Connection: screw connection
Overload and short circuit protection
Working temperature: -10 to +60 °C
Dimensions: W =98mm, H =38mm, L=159mm

• Data cable for connections between control and PC or controller
• Double shielded 2 x 25 - pol

• The switch has a holder for 2 contact blocks. By arrangement, the break contact can be ordered with a make contact or both.
• RoHS-compliant
• Installation-Ø: 22 mm screw fastening
• Button-Ø: 40 mm
• Switching capacity: 250 V/AC/3,0 A
• Connection: screw connection Design: NC 1 x on/(on)
• Temperature range: -20 - +55 °C

• RoHS-compliant
• Lever: roller lever L-12mm
• Execution: changer / role
• Switching capacity: 250 V/AC/16(4) A
• Connection: plug connection 6.3 x 0.8 mm or solder connections
• Dimensions:(W x H x L) 30 x 16 x 10 mm

• Holding torque: 2 Nm bipolar 4 connection cables
• Phase current: 2 A / 7.0 V, - 2 phases
• Step angle: 1.8° - 200 Steps / rev
• Dimensions: W=57mm, H=57mm, L=76mm,
• Shaft d=6.35 /20 mm
• Weight: 1 kg

* Quality product from the stockist *

* New and original packed up *

 

Scope of delivery:
1x stepper motor control for 3 axes 3.0 A
3x stepper motors 2 Nm 2 A
1x power supply - switching power supply S150; 24 V; 6.3 A
1x LPT cable
1x emergency stop switch
3x reference switch - microswitch VT roller lever L-12
Operation manual
Guarantee / invoice
Data sheet with pin assignment