Profi - Control for 3 axes - including:
- 3x output stages SK 5045 up to 4.5 A
- 1x power supply - switching power supply unit S300 up to 48 V and 6.3 A
- 1x interface board with optical isolated connection to the PC and up to 4 axes
- 1x emergency off switch
- 3x reference switch - microswitch VT roller lever L-12
- 3x stepper motors 3.6 Nm and 4 A
- 3x flexible shaft coupling fi-14 x 20 mm
- 3 m CNC copper cable flexible 4 x 1.0 mm2 - shielded
Technical specifications - Descriptions
*3 pieces of output stages SK5045 up to 4,5 A
- Quiet motor running and low heating of motor and output stage.
- Good motor speed thanks to the use of the latest bipolar technology
- A closed housing that can be installed vertically or horizontally protects against mechanical defects
- With overvoltage and short circuit protection.
- Interface board with integrated optoisolation protects the computer form damage.
- Adjustable with DIP switch(no multimeter for setting up needed)
- Automatic current reduction to 50% in standstill (sleep). (via DIP switch)
- Can be used for 2 - 3 phase and 4 phase stepper motors.
- A printed description and connection diagram is included + configuration file for Mach 3.
- Jumpers per phase of 0.75; 1.50; 2.25; 3 A adjustable
- 20-50 volt motor voltage
- Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
- Logic TTL-compatible (5Volt), signal control 400 kHz
- Microstep 1/2 -, 1/4 -,1/8 -, 1/16 -, 1/32 -, 1/64 -, 1/128 -, 1/256 -, 1/5 -, 1/10 -, 1/25 -, 1/50 -, 1/125 -, 1/250
- Configuration control LED
- Dimensions: W = 34mm, H = 75mm, L = 119mm
* 1 piece Power supply unit - Switching power supply unit S300 48 V 6.3 A
- Compact metal housing with screw terminals, industrial quality. Soft start current. Light weight.
- Standard mounting device, therefore identical to most products from other power supply manufacturers.
- Protected against overload, overvoltage and short circuit.
- International use possible through AC and DC wide range input 110 -240 V/AC.
- Power supply unit with very low standby consumption. Environmentally friendly.
Mains input voltage: 100 -120VAC / 200-240 VAC , 50/60 Hz
Nominal output voltage: 48 V/DC -adjustable: from 41 to 56 VDC
Output power: 300W 6.3 A - 3x screw connections
Efficiency: approx. 82%
Connection: screw connection
Overload and short circuit protection
Working temperature: -10 to +60 °C
Dimensions: W =110mm, H =50mm, L=199mm
* 1 piece of interface board opto-isolated connection to PC up to 4 axes
- Connections for limit switch / reference switch, emergency stop switch and tool rating switch.
- 2 relays for switching functions for e.g. a spindle or coolant pump.
- Functionality control is indicated with diodes LED, which simplifies the configuration with the software.
- The distribution of the plug connections is identical to the distribution of our micro-step cards.
- A printed pin assignment and a connection diagram as an example is included in the delivery.
- Optoisolation protects the computer from damage.
- 2 relays for additional switching functions 5A / 230V
- 3 connections for limit switch / reference switch
- with Connection for emergency stop switch and tool rating switch
- Current input: 12V/250mA
- Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
- Logic TTL-compatible (5Volt)
- Removable screw connectors
- Dimensions: W= 115mm x H=77mm x L=20mm
* 1 piece - emergency off switch
- The switch has a holder for 2 contact blocks. By arrangement, the break contact can be ordered with a make contact or both.
- RoHS-compliant
- Installation-Ø: 22 mm screw fastening
- Button-Ø: 40 mm
- Switching capacity: 250 V/AC/3,0 A
- Connection: screw connection Design: NC 1 x on/(on)
- Temperature range: -20 - +55 °C
* 3 reference switches - microswitch VT roller lever L-12
- RoHS-compliant
- Lever: roller lever L-12mm
- Execution: changer / role
- Switching capacity: 250 V/AC/16(4) A
- Connection: plug connection 6.3 x 0.8 mm or solder connections
- Dimensions:(W x H x L) 30 x 16 x 10 mm
* 3 pieces - 3.6 Nm 4 A stepper motors
- Holding torque: 3.6 Nm bipolar 4 connection cables
- Phase current: 4 A / 4.8 V, - 2 phases
- Step angle: 1.8°
- Dimensions: W=86mm, H=86mm, L=66mm,
- Shaft d= 14.00mm
- Weight: 1.9 kg
* 3 x flexible shaft coupling fi 14 mm
- Elastic, torsionally stiff but flexible
- Optimal for micro step control
- 1-part coupling with one-part connector
- Made from high quality aluminum alloy
- Inner diameter bore: both sides fi 14 mm
- Outside diameter: fi 30 mm
- Total length: 34.5 mm
- Shaft displacement of up to 3° possible
- Continues bore - tolerance H7
- Shaft montage with clamping screw
* 3 m CNC copper cable flexible 4 x 1.0 mm2 shielded
Shielded against electromagnetic interference fields ensures a interference-free signal transmission.
Possession was heard Cable strength has a longer service life then conventional cables.
Resistant to a wide variety of oils, acids and other chemical media.
Space-saving installation.
If you have any further questions about this product, just send us an email to info@cncprofi.eu.
On request, we can also prepare complete CNC systems with software and ready for connection, if you are interested. Please give a precise description.
* Quality product from the stockist *
* New and original packed up *
Scope of delivery:
3x output-stage-stepper-motor-control for 1 axis 4.5A
3x stepper motors 3.6 Nm 4 A
3x flexible shaft coupling fi 14 mm
3m CNC copper cable flexible 4 x 1.0 mm2 - shielded
1x power supply - switching power supply S300; 48 V; 6.3 A
1x interface board opto-isolated connection to PC up to 4 axes
1x emergency stop switch
3x reference switch - microswitch VT roller lever L-12
Operation manual
Guarantee / invoice
Data sheet with pin assignment
