Profi - Control for 3 axes - including:
- 1x control for 3 axes with metal housing SM3 up to 3.0A
- 1x power supply - switching power supply unit S150 up to 28 V and 6.3 A
- 1x LPT connection cable to PC
- 1x emergency off switch
- 3x reference switch - microswitch VT roller lever L-12
- 3x stepper motors 2 Nm and 2 A
- 3x flexible shaft coupling fi-6 x 20 mm
- 3 m CNC copper cable flexible 4 x 0.5 mm2 - shielded
Technical specifications - Descriptions
*1 piece control for 3 axes with metal housing SM3 up to 3.0 A, CNC control PC-NC
- A closed housing that can be installed vertically or horizontally protects against mechanical defects
- With overvoltage and short circuit protection.
- Interface board with integrated optoisolation protects the computer form damage.
- Connection for spindle speed regulation via PC or controller.
- Connections for limit switch / reference switch, emergency stop switch and tool rating switch.
- 2 relays for switching functions for e.g. a spindle or coolant pump.
- Functionality control is indicated with diodes LED, which simplifies the configuration with the software.
- Automatic current reduction to 100%, 75%, 50%, 25% in standstill (sleep). (via DIP switch)
- Can be used for 2 - 3 phase and 4 phase stepper motors.
- A printed description and connection diagram is included + configuration file for Mach 3.
- Jumpers per phase of 0.75; 1.50; 2.25; 3 A adjustable
- 12-34 volt motor voltage
- Compatible with Mach 2/3,PCNC, CNC-Profi ,DIN-CNC , EMC...
- Logic TTL-compatible (5Volt), signal control 400 kHz
- Microstep 1 / 1-, 1/2 -, 1/8 -, 1/16 -
- Toshiba TB6560AHQ chip
- Signal control 100 kHz
- Optoisolation protects the computer from damage.
- 2 relays for additional switching functions 5A / 230V
- 4 connections for limit switch / reference switch
- with Connection for emergency stop switch and tool rating switch
- Additional current output for 12 V / 1 A e.g. for fans
- Connection for spindle speed regulation signal 0 to 10 V.
- With built-in potentiometer - you can reduce the spindle signal range
- Removable screw connectors
- Closed metal housing
- Configuration control LED
- Dimensions: W = 130mm, H = 35mm, L = 150mm
Description - Completion for spindle
Current consumption max. 50 mA
Control signal: 0 - 10 V
The shape of the pulse course: Rectangular
Source ability: 20 mA
Constant processing: 100Hz / 0.1
Non-linearity: not greater than 0.1%
* 1 piece Power supply unit - Switching power supply unit S150 24 V
- Compact metal housing with screw terminals, industrial quality. Soft start current. Light weight.
- Standard mounting device, therefore identical to most products from other power supply manufacturers.
- Protected against overload, overvoltage and short circuit.
- International use possible through AC and DC wide range input 110 -240 V/AC.
- Power supply unit with very low standby consumption. Environmentally friendly.
Mains input voltage: 100 -120VAC / 200-240 VAC , 50/60 Hz
Nominal output voltage: 24 V/DC -adjustable: from 21 to 28 VDC
Output power: 150W 6.3 A - 2x screw connections
Efficiency: approx. 85%
Connection: screw connection
Overload and short circuit protection
Working temperature: -10 to +60 °C
Dimensions: W =98mm, H =38mm, L=159mm
* 1 piece LPT connection cable to PC
- Data cable for connections between control and PC or controller
- Double shielded 2 x 25 - pol
* 1 piece - emergency off switch
- The switch has a holder for 2 contact blocks. By arrangement, the break contact can be ordered with a make contact or both.
- RoHS-compliant
- Installation-Ø: 22 mm screw fastening
- Button-Ø: 40 mm
- Switching capacity: 250 V/AC/3,0 A
- Connection: screw connection Design: NC 1 x on/(on)
- Temperature range: -20 - +55 °C
* 3 reference switches - microswitch VT roller lever L-12
- RoHS-compliant
- Lever: roller lever L-12mm
- Execution: changer / role
- Switching capacity: 250 V/AC/16(4) A
- Connection: plug connection 6.3 x 0.8 mm or solder connections
- Dimensions:(W x H x L) 30 x 16 x 10 mm
* 3 pieces - 2 Nm 2 A stepper motors
- Holding torque: 2 Nm bipolar 4 connection cables
- Phase current: 2 A / 7.0 V, - 2 phases
- Step angle: 1.8° - 200 Steps / rev
- Dimensions: W=57mm, H=57mm, L=76mm,
- Shaft d=6.35 /20 mm
- Weight: 1 kg
* 3 x flexible shaft coupling fi 6.35 mm
- Elastic, torsionally stiff but flexible
- Optimal for micro step control
- 1-part coupling with one-part connector
- Made from high quality aluminum alloy
- Inner diameter bore: both sides fi 6.35 mm
- Outside diameter: fi 20 mm
- Total length: 24.5 mm
- Shaft displacement of up to 3° possible
- Continues bore - tolerance H7
- Shaft montage with clamping screw
* 3 m CNC copper cable flexible 4 x 0.5 mm2 shielded
Shielded against electromagnetic interference fields ensures a interference-free signal transmission.
Possession was heard Cable strength has a longer service life then conventional cables.
Resistant to a wide variety of oils, acids and other chemical media.
Space-saving installation.
If you have any further questions about this product, just send us an email to info@cncprofi.eu.
On request, we can also prepare complete CNC systems with software and ready for connection, if you are interested. Please give a precise description.
* Quality product from the stockist *
* New and original packed up *
Scope of delivery:
1x stepper motor control for 3 axes 3.0 A
3x stepper motors 2 Nm 2 A
3x flexible shaft coupling fi 6.35 x 20 mm
3m CNC copper cable flexible 4 x 0.5 mm2 - shielded
1x power supply - switching power supply S150; 24 V; 6.3 A
1x LPT cable
1x emergency stop switch
3x reference switch - microswitch VT roller lever L-12
Operation manual
Guarantee / invoice
Data sheet with pin assignment
